RetroZone

SNES PowerPaks and all RetroKits will be back in stock in early-mid Sept!

ReproPak MMC1

9.00

Building a reproduction just got easier

With this board you no longer have to search for the correct donor board then worry about chip sizes and pinouts.

By populating different chips on the ReproPak MMC1 you can select between any common MMC1 layout. Choose between CHRRAM or CHRROM, and 8KB/16KB/32KB WRAM. No wiring needed, just solder the chips in the open spots. There is a spot for the Ciclone so your board will run on a NTSC, PAL A, PAL B, and Asian NES system. Cart Plastics and Ciclones are available on this site.

The PRG uses 27C010/27C020/27C040 DIP eproms, or 29F010/29F020/29F040 DIP flash chips. The CHR ROM uses 27C010/27C020 DIP eproms, or 29F010/29F020 DIP flash chips. The CHR RAM and WRAM uses 6264/62256 DIP srams. The Ciclone is only needed if you have not disabled the lockout chip inside your NES.

Solder Chips	Completed Board (FF1+2)	Play!

Package Includes:

ReproPak MMC1 printed circuit board

Cart plastics, Memory, and Ciclone chips not included

Downloads:

ReproPak MMC1 Manual pdf (950KB)

System Compatibility List:

Works on authentic Nintendo Systems including NTSC toaster, top loader, PAL A, PAL B, and Asian systems.

Works on clone systems like the NEX, Yobo, and FC Twin.

Untested on Famicom using 72-60 pin converter, should work.

Untested on portable systems, should work.

Current Known Bugs:

none