Home » ReproPak Log Off | My Account | Cart Contents | Checkout | |
AVS consoles are in stock and shipping now!

 
RetroUSB
ReproPak
IMAGE_BUTTON_DISCONTINUED
price:$ 0.00 

Building a reproduction just got easier

With this board you no longer have to search for the correct donor board then worry about chip sizes and pinouts.

By populating different chips on the ReproPak you can select between 4 common mappers. Also choose between CHRRAM or CHRROM, and pick mirroring with a solder jumper. No wiring needed, just solder the chips in the open spots. There is a spot for the Ciclone so your board will run on a NTSC, PAL A, PAL B, and Asian NES system. Cart Plastics and Ciclones are available on this site.

The ReproPak board supports 4 different common mappers:

iNES
Number
Board
Name
MAX
CHR
ROM
MAX
CHR
RAM
MAX
PRG
ROM
Mirror Mapper
Chips
0 NROM 8KB 32KB H/V none
2 U*ROM 8KB 256KB H/V 74HC32
74HC161
3 CNROM 32KB 32KB H/V 74HC161
7 A*ROM 8KB 256KB One 74HC161


The PRG uses 27C010 or 27C020 DIP eproms, or can use 29F010 or 29F020 DIP flash chips. The CHR ROM uses 27C256 or 27C512 DIP eproms. The CHR RAM uses 6264 or 62256 DIP srams. The mapper chips (74HC32 and 74HC161) are also standard DIP parts. The Ciclone is only needed if you have not disabled the lockout chip inside your NES.

Bare ReproPak Solder Mapper Play!


Package Includes:
  • ReproPak printed circuit board
  • Cart plastics, Memory, Mapper, and Ciclone chips not included


  • Downloads:
  • ReproPak Manual pdf (900KB)


  • System Compatibility List:
  • Works on authentic Nintendo Systems including NTSC toaster, top loader, PAL A, PAL B, and Asian systems.
  • Works on clone systems like the NEX, Yobo, and FC Twin.
  • Untested on Famicom using 72-60 pin converter, should work.
  • Untested on portable systems, should work.


  • Current Known Bugs:
  • none